TEOST®-环球（香港）科技有限公司

Product information

TEOST®

Category：Industrial Lubrication

Method Standard：ASTM D6335, D7097, D8447, SH/T 0750, SH/T 0834

Application：Evaluating the effect of engine operating conditions on the oxidation and deposit-forming tendencies of engine oils.

Brand：TANNAS & King

Description Features Test Methods Instrument Specifications

The TEOST® 33C test simulates the effect of engine operating conditions on the oxidation and deposit-forming tendencies of engine oils, especially in the high-temperature Turbocharger area. The TEOST MHT® test simulates similar effects and conditions found in the ring belt and piston ring areas of the engine.

Oil samples treated with catalysts are pumped over a heated 33C Depositor Rod or a coiled MHT® Depositor Rod on which deposits form. The weight of the Depositor Rod after the test is subtracted from its pre-test weight and added to the particulate weight collected by filtering the oil remaining. The results are reported in milligrams.

· Adjustable temperature zones and pump speeds.

· Clear Glass Mantle with MHT™ and Turbo™ tests for easy viewing of depositor area during the test.

· Ability to collect the volatilized material for further analysis and investigation.

· ASTM D6335 | Dual/33C Model
(Chinese SH/T0750)

· ASTM D7097 | MHT® Model
(Moderately High Temperature)

· ASTM D8447 | TEOST Turbo®

Dimensions (W x D x H)	Bench-top: 33 x 50 x 56 cm 13 x 19.5 x 22 inches
Weight	30 kg \| (64 lbs.)
Voltage	120 or 220 VAC , Single Phase Power Draw - 5 amp.
Frequency	50/60 Hz.
Depositor Rods	33C: Precision steel MHTurbo®: Precision steel with specially treated wire winding
Sample Volume	33C: Total - 250 mL — Actual Volume Tested - 116 mL (100 mL plus 16 mL left in lines after flushing) MHT®: 8.5 grams (± 0.001 g) Turbo®: 20 mL plus 16 mL left in lines after flushing
Operating Temperatures	33C: Reactor Temperature: 100°C (±1°C) Depositor Temperature Cycle: 200°C to 480°C at designated time intervals MHT®: Constant 285°C Turbo®: Reactor Temperature: 100°C (±1°C) Depositor Temperature Cycle: 290°C to 320°C at designated time intervals
33C Test Parameters	12 Heating Cycles: 9.5 minutes/cycle 114 minute total test time Pump Rate: 0.45 mL/min. or 0.40 g/min. Moist Air Flow Rate: 3.6 mL/min. through H2O N2O Flow Rate: 3.6 mL/min. through H2O
MHT® Test Parameters	Test Time: 24 hours Pump Rate: 0.25 g/min. Dry Air Flow Rate: 10mL/min. MHT Catalyst: Refer to bottle
Turbo® Test Parameters	Test Time: 18 hours Pump Rate: 0.25 g/min.. Moist Air Flow Rate: 10 mL/min.
Safety	CE Mark Current Limiting Fuses & Over-temperature Cut-out Fuse Protective Heat Shield
Shipping Weight	MHT® or 33C: ~60 kg \| (132 lbs.) Dual: ~82 kg \| (180 lbs.)
Shipping Dimensions (W x D x H)	Dual, MHT® or 33C: 1 Pallet \| 61 x 81 x 89 cm

Related recommendations

HFRR
Brand：PCS

Falex-TAA
Brand：FALEX

HPR
Brand：PCS