The Universal Sheet Metal Testing Machine Model 142-20-Basic with electro-hydraulic drive, fully automatic test sequence and switch off at specimen failure, max. drawing force of 200 kN.
Application: This Testing Machine can be used not only to perform effortlessly, quickly and accurately all important and known deep drawing tests for ferrous and non-ferrous metals, but it is also designed for a large number of additional technological investigations like the ERICHSEN Cupping Test and the ERICHSEN Deep Drawing Cup Test on sheet and strips.
Relevant attributes are: Square Cup Test (40 x 40 mm), Bore Expanding Test (KWI Test), Bore Expanding Test (ISO 16630), Deep Drawing Test with Blankholder Quick Release (for Earing Test), Deep Drawing Test with Preselected Punch Stroke, Deep Drawing Test at High Temperatures up to 550 °C, ERICHSEN Cupping Test for Lacquer and Paint in accordance with DIN ISO 1520, Stamping Lacquer Test and Deep Drawing Cup Test on Coil Coatings.
Special Requirements on request.
The Testing Machine is driven electro-hydraulically. The test sequence can be controlled automatically or manually, as desired. A programmable logic controller is used to control the functions of the machine. The testing machine is equipped with digital displays for indicating the sheet holder force, the drawing force. as well as the drawing punch stroke. The triple-acting hydraulic system in conjunction with the general design results in the following cost saving simplifications:
The Sheet Metal Testing Machine, Model 142-Basic, was developed for testing as a means for continuous production control using standardised and other established methods.
The Universal Sheet Metal Testing Machine Model 142-40-Basic with electro-hydraulic drive, fully automatic test sequence and switch off at specimen failure, max. drawing force of 400 kN.
Application: This Testing Machine can be used not only to perform effortlessly, quickly and accurately all important and known deep drawing tests for ferrous and non-ferrous metals, but it is also designed for a large number of additional technological investigations like the ERICHSEN Cupping Test and the ERICHSEN Deep Drawing Cup Test on sheet and strips.
Relevant attributes are: Square Cup Test (40 x 40 mm), Bore Expanding Test (KWI Test), Bore Expanding Test (ISO 16630), Determination of the Forming Limit Curves (FLC), Deep Drawing Test with Blankholder Quick Release (for Earing Test), Deep Drawing Test with Preselected Punch Stroke, Deep Drawing Test at High Temperatures up to 550 °C, ERICHSEN Cupping Test for Lacquer and Paint in accordance with DIN ISO 1520, Stamping Lacquer Test and Deep Drawing Cup Test on Coil Coatings.
Special Requirements on request.
The Testing Machine is driven electro-hydraulically. The test sequence can be controlled automatically or manually, as desired. A programmable logic controller is used to control the functions of the machine. The testing machine is equipped with digital displays for indicating the sheet holder force, the drawing force. as well as the drawing punch stroke. The triple-acting hydraulic system in conjunction with the general design results in the following cost saving simplifications:
The Sheet Metal Testing Machine, Model 142-Basic, was developed for testing as a means for continuous production control using standardised and other established methods.
Location：Home > Our Products >
Manufacturers >
Erichsen >
Universal-Sheet Metal Testing Machine 142-20/40-Basic
